• +91 - 9822392479
  • Description

    The Chemical Anchor Stud ( CAS ) is a chisel ended anchor. It is used with any of our injection systems and glass capsules in masonry and concrete. On installation the stud becomes chemically bonded to the base material. Notably the fixing method imposes no expansion stress on the base material and is ideal for shock or vibratory loading and for softer or low density building materials where expansion stresses would normally result in failure. The method also gives exceptional performance for close centre and close to edge fixing. The nut may be removed and replaced without affecting the anchorage. The chemical anchor CAS is supplied complete with high tensile hex nut and plain washer in addition to one external hex drive adapter in each box.

Chemical Anchor Stud

 

Product code
Zinc plated
5 8 Grade
Anchor
thread
Size (mm)
Anchor
Length
(mm)
Hole
Diameter
(mm)
Effective
anchoring
depth (mm)
Max. Usable
Length
(mm)
Width
across
nut (mm)
Hex
nut
(mm) SW
Washer
in dia
(mm)
CASO8110E M 08 110 10 80 13 5 13 9
CAS10130E M 10 130 12 90 20 7 17 11
CAS10160E M 10 160 12 90 52 7 17 11
CAS12160E M 12 160 14 110 25 8 19 13
CAS12220E M 12 220 14 110 90 8 19 13
CAS12250E M 12 250 14 110 120 8 19 13
CAS16165E M 16 165 18 125 13 12 24 17
CAS16190E M 16 190 18 125 35 12 24 17
CAS16250E M 16 250 18 125 98 12 24 17
CAS16300E M 16 300 18 125 148 12 24 17
CAS16380E M 16 380 18 125 235 12 24 17
CAS16500E M 16 500 18 125 355 12 24 21
CAS20260E M 20 260 25 170 65 12 30 21
CAS20350E M 20 350 25 170 155 12 30 21
CAS20500E M 20 500 25 170 305 12 30 21
CAS24300E M 24 300 28 210 65 16 36 26
CAS24400E M 24 400 28 210 165 16 36 26
CAS24600E M 24 600 28 210 365 16 36 26
CAS27400E M 27 400 32 210 165 18 41 28
CAS30380E M 30 380 35 280 65 25 46 33
CAS30500E M 30 500 35 280 185 25 46 33

 

Installation

Designed by : MID   Hosted by : GID   Promoted by : PBD