• +91 - 9822392479

  • A two component chemical anchoring injection system in 1 : 1 ratio formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete and used for high performance structural applications. CYS400EY is a 2 component high strength pure epoxy chemical anchoring resin mortar system. It is designed for deep embedment and large diameter holes due to its zero shrinkage and longer working times. CYS400EY is suitable for diamond drilled holes with rebar and in areas of high chemical exposure e.g. Sea salt and swimming pools.

  • Features and Applications
  • Suitable for high loads featuring large diameters and deep embedment's
  • Longer working times make it suitable for large holes, and high temperatures
  • No shrinkage, good for large diameter fixings
  • Use in wet or flooded environments and fixing holes or underwater
  • High durability, resistance to chemicals
  • Used for diamond drilled holes
  • Solvent free resin
  • Fixings in concrete, wood or other high strength materials
  • High bond strength with high load resistance
  • For deep embedment installations
  • Used with all grades of threaded rod and rebar
  • Longer gelling times for large holes
  • Used in dry and wet concrete and also in wood
  • Used in corrosive environment
  • Used in flooded holes
  • Low shrinkage enables large diameter installations
  • Used for elevated temperatures
  • Closed edge distance and small spacing
  • Suitable for diamond drilled holes
  • European approval TR 023 for rebar installations
  • Manual cleaning up to 20 mm diameter and embedment depths of 240 mm

Chemfix-1-1-Epoxy

Approvals
  • 5 / 0266 & 15 / 0255 - ETA TR023 Post Installed Rebar Installations
  • CE Certified 1220 - CPR - 1561 - ITEC, Barcelona. 1404 - CPR - 2777 ZAG
  • ITB Approval ( Poland ) 0973 / W
  • R240 Fire Test Report SIGGMA
  • WRAS approved for use No. 1510539
  • Creep test under sustained tensile load UNE - EN 1544 : 2006
  • LEED tested 2009 EQ c4. 1 SCAQMD rule 1168 ( 2005 )
  • VOC A+ Rating ( Volatile Organic Content )
Gelling time
Base Material Temperature 45° 35° 25° 15°
Typical Gel Time ( min ) 6 12 20 60 120
Minimum Load Time 90 180 300 600 960
Applications Process

Designed by : MID   Hosted by : GID   Promoted by : PBD