request-quote
  • +91 - 9822392479

Chemfix CE 500/585 ML

  • CE500 is a Two component high strength pure epoxy chemical anchoring resin systems. It has the advantage of European Technical Approvals for post installed rebar, used in cracked & non cracked plus WRAS & Fire Rates certificates.

    CE500 is relatively slow curing injection mortar system, thus ideal for very large fixing & is delivered through a mixing nozzle directly into the fixing hole. The cartridge and extruded using a special designed fixing tool.

  • Approvals
  • • ETA option 1 for cracked concrete with studs and rebar TR 029.
    • ETA option 1 for rebar TR 023 : approved for seismic loads C2.
    • F120 fire test report.
    • ICC - ES approval.
    • WEAS approved.
    • ETA approved in flooded holes, wet and dry concrete.
    • ETA approved for diamond drilled holes.
    • Tested according to LEED 2009 EQ c4.1, SCAQMD rule 1168 ( 2005 ).

Chemfix  CE 500/585 ML

Chemfix CYS 400 / 400ML EY

  • CYS400EY is a 2 component high strength pure epoxy chemical anchoring resin mortar systems. It is designed for deep embedment and large diameter holes due to its zero shrinkage and longer working times.

    CYS400EY is suitable for diamond drilled holes with rebar and in areas of high chemical exposure eg. seasalt and swimming pools.

  • Approvals
  • • European Technical Approval for Post - Installed Rebar TR 023.
    • ITB approved.
    • WRAS approved.
    • Tested according to LEED 2009 EQ c4.1, SCAQMD rule 1168 ( 2005 ).
    • A+ Rating VOC contest.
    • Fire test approved.

Chemfix  CYS 400 / 400ML EY

Chemfix PESF / 345ML

  • PESF / 345ML is a 2 component high strength 10 : 1 ratio chemical anchoring resin mortar system. It is designed as a fast curing high strength resign fixings anchor for medium to high load with stud and rebar.

    PESF / 345ML is absolutely styrene free low odour chemical anchor resin. This dormula is specialist for to use up to temperature 45° C with normal gelling time.

  • Approvals
  • • ETA option 7 chemical anchor.
    • CE certified, solvenia.
    • ITB approval ( Poland ).
    • Tested by Imperial college, London.
    • WRAS approved for use potable drinking water.
    • LEED tested 2009 EQ.
    • VOC A+ rating ( Volatile Organic Content ).

Chemfix  CYS370V

Chemfix CYS370V

  • CYS370V is a 2 components high strength 10 : 1 ratio chemical anchoring resin system. It is designed as a fast curing high strength resin fixing especially in corrosive environments or damp conditions.

    CYS370V is absolutely styrene free low odour chemical anchor resin mortar system and also suitable to use underwater condition.

  • Approvals
  • • ETA option 7 for uncracked concrete with studs and rebar TR 029.
    • ETA option 1 for cracked concrete with studs.
    • ETA for post - installed rebar TR 023.
    • WRAS approved for use with potable water.
    • Tested according to LEED 2009.

Chemfix  CYS370V

Designed by : MID   Hosted by : GID   Promoted by : PBD