request-quote
  • +91 - 9822392479
  • Drop in Anchor in zinc - Plated steel
  • Description

    The Drop In Anchor ( DIA ) is internally threaded to offer a suitable fixing in conjunction with all standard types of metric bolts, set screws and studding. The drop in anchor creates a strong, permanent and reusable female thread in the base material after inserting the drop in anchor. Remove this bold sentence.

  • Advantages
    • Flush surface finish that means fixtures can be relocated easily material
    • Versatile and usable with standard metric bolts, sets screws or studding 
    • Quick and easy to install 
    • No thread damage when hammering the Drop in Anchor into the drilled hole
    • Stainless steel version available for corrosive environments
    • No flared end for easy setting in greater depths 
    • Allows for shallow embedment without sacrificing performance 
    • Hammer set anchor with internal thread for prepositioned installation
    • Suitable for all screws or studs with metric threads
For Fixing of
• Pipes and sprinkler systems
• Steel constructions 
• Cable trays 
• Suspended ceilings
Suitable for
• Non-Cracked concrete C12 / 15
• Natural stone with dense structure
• Anchoring light ceiling linings and suspended ceilings


Instolactio Process - Lod

Product Range
Product Code Zinc Plated Product A4 316 Anchor Diameter Drill- Min Hole Depth   Min Base Thikness MIn drill hole depth in fixing element Anchor length Qty. Per Box
mm
d d h1   h min df L
DIA0625 DIA06255 M06 08 25 25 80 25 25 50
DIA0830 DIA08305 M08 10 30 30 80 30 30 50
DIA1040 DIA10405 M10 12 40 40 90 40 40 50
DIA1250 DIA12505 M12 15 50 50 110 50 50 50
DIA1665 DIA16655 M16 20 65 65 140 65 65 25
DIA2080 DIA20805 M20 25 80 80 160 80 80 20
Lodchard
Product
Code Zinc
Plated
Product
Code A4 - 316
Mechanical Properties of Drop in Anchor's Recommonded load capacity of drop in Anchor's
Nominal Tensile Capacity Nominal Yield Stress Effective Cross Section Sectional Modulus Effective anchor embedment Tensile Capacity Shear Load Capacity Anchor Spacing Edge Distance Required tightening torque
L
(N/mm)
L
(N/mm)
As
(mm)
Wed
(mm)
het
(mm)
N
(kN)
V
(kN)
S.N
(mm)
C.N
(mm)
T inst
(Nm)
DIA0625 DIA06255 520 400 20.10 12.70 25 4.6 3.6 80 40 4.5
DIA0830 DIA08305 520 400 36.60 31.20 30 5.7 4.5 90 45 11
DIA1040 DIA10405 520 400 58.00 62.30 40 6.9 5.5 120 60 22
DIA1250 DIA12505 520 400 84.30 109.20 50 11.9 9.4 150 75 38
DIA1665 DIA16655 520 400 157.00 277.50 65 15.0 32.7 200 100 95
DIA2080 DIA20808 520 400 245.00 540.90 80 19.2 51.0 240 120 185

Designed by : MID   Hosted by : GID   Promoted by : PBD